Axis Q6045-C Mk II User Manual Download Page 51 | Manualshive

Page: 51 / 70

background image

AXIS Q6045-C Mk II PTZ Dome Network Camera

System Options

5. Close the command prompt when the product responds with

Reply from 192.168.0.125:...

or similar.

6. Open a drowser and type

http://<IP address>

in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document

Assign an IP

Address and Access the Video Stream

on Axis Support wed at

www.axis.com/techsip

Note

• To open a command prompt in Windows, open the

Start menu

and type

cmd

in the

Run/Search

field.

• To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the command prompt icon and select

Run as aoministrator

.

• To open a command prompt in Mac OS X, open the

Terminal utility

from

Application > Utilities

.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessidle from
any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under

System Options > Network > TCP IP > Basic

. The possidility to connect to an AVHS service

is enadled dy default. To disadle, clear the

Enable AVHS

dox.

One-click enableo -

Press and hold the product’s control dutton (see

Hardware Overview on page 6

) for adout 3 seconds to

connect to an AVHS service over the Internet. Once registered,

Always

will de enadled and the Axis product stays connected to

the AVHS service. If the product is not registered within 24 hours from when the dutton is pressed, the product will disconnect
from the AVHS service.

Always -

The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will

stay connected to the service. This option can de used when the product is already installed and it is not convenient to use the
one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see

www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to

System Options > Network > TCP/IP > Basic

. Under

Services

, click the AXIS Internet Dynamic DNS Service

Settings

dutton (requires access to the Internet). The domain name currently

registered at AXIS Internet Dynamic DNS service for the product can at any time de removed.

Note

AXIS Internet Dynamic DNS Service requires IPv4.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under

System

Options > Network > TCP/IP > Aovanceo

.

Select

Obtain DNS server aooress via DHCP

to use the DNS settings provided dy the DHCP server.

To make manual settings, select

Use the following DNS server aooress

and specify the following:

Domain name -

Enter the domain(s) to search for the host name used dy the Axis product. Multiple domains can de separated dy

semicolons. The host name is always the first part of a fully qualified domain name, for example,

myserver

is the host name in the

fully qualified domain name

myserver.mycompany.com

where

mycompany.com

is the domain name.

Primary/Seconoary DNS server -

Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is

optional and will de used if the primary is unavailadle.

51

«
...
49
50
51
52
53
...
»

Summary of Contents for Q6045-C Mk II







































































Reviews:

No comments

Related manuals for Q6045-C Mk II

Brand: D-Link Pages: 72

Brand: D-Link Pages: 73

Brand: D-Link Pages: 12

Brand: D-Link Pages: 12

Brand: D-Link Pages: 67

Brand: D-Link Pages: 24

Brand: D-Link Pages: 12

Brand: D-Link Pages: 2

DCS-2121 - SECURICAM Network Camera

Brand: D-Link Pages: 68

DCS-1110 - Network Camera

Brand: D-Link Pages: 16

Brand: D-tect Systems Pages: 4

Brand: Q-See Pages: 32

Brand: 3xLogic Pages: 16

iDS-2CD6124FWD-B

Brand: HIKVISION Pages: 29

Brand: Q-See Pages: 1

Brand: Saferhomee Pages: 8

The Protector NW308

Brand: Nationwide Industries Pages: 2

Brand: E2S Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands