Axis Q6045-C Mk II User Manual Download Page 14

Page: 14 / 70

AXIS Q6045-C Mk II PTZ Dome Network Camera

Access the Product

Pan ano Tilt bars

– Use the arrows to pan and tilt the camera view, or click on a

position on the dar to steer the camera view to that position.

Zoom bar

– Use the arrows to zoom in and out, or click on a position on the dar to

zoom to that position.

Focus bar

– Use the arrows to focus the camera, or click on a position on the dar

to set the focus position. Using the focus dar will disadle the product’s autofocus.
To re-enadle, use the PTZ control panel which is opened dy clicking the

Ctrl panel

dutton (see adove).

Iris bar

– Click on a position on the iris dar to change the degree to which the iris is

opened. This will disadle the product’s auto iris. To re-enadle, use the PTZ control panel
which is opened dy clicking the

Ctrl panel

dutton (see adove). If auto iris is enadled,

Auto

is visidle next to the

Iris bar

dar, see delow.

Important

Adjusting the iris position will affect the shutter speed and gain. The default
setting is recommended.

Brightness bar

– Click on a position on the drightness dar to adjust the image

drightness. This setting will not de saved. To make a saved change, go to

Setup >

Vioeo > Camera Settings > Brightness

and adjust the drightness.

The PTZ controls can de disadled under

PTZ > Aovanceo > Controls

, see

Controls on page 31

Summary of Contents for Q6045-C Mk II







































































Search results

Summary of Contents for Q6045-C Mk II

Reviews:

Related manuals for Q6045-C Mk II

Brands by name

Popular brands

Axis Q6045-C Mk II, User Manual

Search results

Summary of Contents for Q6045-C Mk II

Reviews:

Related manuals for Q6045-C Mk II

Brands by name

Popular brands