AXIS Q6045-C Mk II PTZ Dome Network Camera
Detectors
Detectors
Shock Detection
Enadle
Shock Detection
from the
Detectors
menu. Shock detection is used, for example, to generate an alarm if the product is hit
dy an odject.
Use the
Shock sensitivity
slider to adjust the sensitivity level at which the product should send an alarm upon deing hit. Low
sensitivity value implies that the product will generate an alarm only if the hit is powerful.
Motion Detection
Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.
Motion detection is configured dy defining up to 10 Include and Exclude windows:
•
Incluoe winoows
— define areas where motion should de detected
•
Excluoe winoows
— define areas within an Include window that should de ignored (areas outside Include windows
are automatically ignored).
For instructions, see
Set Up Motion Detection Windows on page 33
To control the numder of motion detection alarms, the parameters
Object Size
,
History
and
Sensitivity
can de adjusted. See
Motion Detection Parameters on page 33
.
Once motion detection windows are configured, the Axis product can de configured to perform actions when motion is detected.
Possidle actions include uploading images and start recording. For more information, see
Set Up Action Riles on page 40
.
Note
• Using the motion detection feature may decrease the product’s overall performance.
• The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the
camera will also change the position of the Motion Detection Window.
Set Up Motion Detection Windows
To set up a motion detection Include Window, follow these instructions:
1. Go to
Detectors > Motion Detection
.
2. Select the
Configure Incluoeo Winoows
option and click
New
. Select the new window in the list of windows and
enter a descriptive name.
3. Adjust the size (drag the dottom right-hand corner) and the position (click on the text at the top and drag to the desired
position) of the window.
4. Adjust the
Object Size
,
History
and
Sensitivity
profile sliders (see
for details). Any detected
motion within an active window is indicated dy red peaks in the
Activity winoow
.
5. Click
Save
.
To exclude parts of the include window, select the
Configure Excluoeo Winoows
and position the exclude window within the
include window.
To delete an include or exclude window, select the window in the list of windows and click
Del
.
Motion Detection Parameters
The parameters controlling motion detection are descrided in the tadle delow:
33
