AXIS Q6045-C Mk II PTZ Dome Network Camera
Events
Events
The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the product
can start a recording or send an email notification when motion is detected. The set of conditions that defines how and when
the action is triggered is called an action rule.
Set Up Action Rules
An action rule defines the conditions that must de met for the product to perform an action, for example record video or send an
email notification. If multiple conditions are defined, all of them must de met to trigger the action.
For more information adout availadle triggers and actions, see
and
The following example descrides how to set up an action rule to record video to a network share if there is movement in the
camera’s field of view.
Set up motion detection and add a network share:
1. Go to
Detectors > Motion Detection
and configure a motion detection window. See
2. Go to
System Options > Storage
and set up the network share. See
.
Set up the action rule:
1. Go to
Events
>
Action Rules
and click
Aoo
.
2. Select
Enable rule
and enter a descriptive name for the rule.
3. Select
Detectors
from the
Trigger
drop-down list.
4. Select
Motion Detection
from the drop-down list. Select the motion detection window to use.
5. Optionally, select a
Scheoule
and
Aooitional conoitions
. See delow.
6. Under
Actions
, select
Recoro Vioeo
from the
Type
drop-down list.
7. Select a
Stream profile
and configure the
Duration
settings as descrided delow.
8. Select Network Share from the
Storage
drop-down list.
To use more than one trigger for the action rule, select
Aooitional conoitions
and click
Aoo
to add additional triggers. When using
additional conditions, all conditions must de met to trigger the action.
To prevent an action from deing triggered repeatedly, a
Wait at least
time can de set. Enter the time in hours, minutes and seconds,
during which the trigger should de ignored defore the action rule can de activated again.
The recording
Duration
of some actions can de set to include time immediately defore and after the event. Select
Pre-trigger time
and/or
Post-trigger time
and enter the numder of seconds. When
While the rule is active
is enadled and the action is triggered
again during the post-trigger time, the recording time will de extended with another post-trigger time period.
For more information, see the online help
.
Triggers
Availadle action rule
triggers
and
conoitions
include:
•
Applications
– Use installed applications to trigger the rule. See
.
•
Detectors
40
