Jet Cleaner TANKO-MX
7 Maintenance
Operating/Installation Instructions 2019/08
81/102
Note regarding Devices with Nozzle Extension (12.1):
Push the jet concentrator (13) into the nozzle (12).
Push the seal ring (13.3) into the threaded bore of the nozzle carrier (27) as far as it will go.
Fasten the nozzle extension (12.1) in the vise.
Screw the nozzle (12), together with the jet concentrator (13), into the nozzle extension (12.1)
and tighten it.
Remove the nozzle extension (12.1) together with the nozzle (12) from the vise.
2)
Fasten the shaft-axle connection (24) in the vise so that the dome faces upwards and the thread
for the bearing plate (28) faces to the side.
3)
Insert the collar bushing (07) and rinsing ring (07.1) into the shaft-axle connection (24).