Jet Cleaner TANKO-MX
58/102
Operating/Installation Instructions 2019/08
7 Maintenance
Interface B
NOTE
Excessively small installation openings on the container!
Risk of damage to the device or its surroundings.
Before unfastening the process connection [PC], check whether the device can be lifted out through
the installation opening of the container with the cleaning head
(see
Section 3.3
Technical Data
).
The instructions for interface "C" must be observed if the installation opening is too small.
Interface C
Picture 7.3-1: Nozzle carrier can be rotated 180°
NOTE
Excessively small installation opening for the container or components (e.g. agitators) in the
container!! Nozzles collide during removal.
Damage to the device. The nozzle carrier may come loose.
The nozzles must NOT collide!
1. Check the following before pulling the device out of the container:
–
the minimum dimension for the installation opening (see
Section 3.3 Technical Data
) and
–
Check for interfering contours on surrounding components in the container.
2. Lift the device (downpipe [DP] with cleaning head) out of the container through the installation
opening with the utmost care
180°
180°
180°