Jet Cleaner TANKO-MX
78/102
Operating/Installation Instructions 2019/08
7 Maintenance
9. Screw the set screw (33) into the impeller (15) and tighten it with a hexagon socket wrench
size 2.5 mm.
10. Insert the spur gear (18), together with the impeller (15) and the set screw (33), through the
opening in the housing (02) and push the shaft end with the slot into the collar bushing (06).
11.
NOTE
The spur gears (19; 20) have different gearing!
Two different spur gears, type A and type B, must always be used.
Press two collar bushings (04) into each of the spur gears (19; 20).
12. Push the axle for the planetary gear wheel (17) into the planetary carrier (16) and through the collar
bushings (04) on the spur gears (19; 20).
13. Insert the spiral circlip (19) into the external groove on the planetary carrier (16) in a spiral pattern
and allow it to engage in place.
14. Press the collar bushing (03) into the planetary carrier (16).
A
B