Jet Cleaner TANKO-MX
6 Commissioning
Operating/Installation Instructions 2019/08
49/102
WARNING
Risk if the operating/working area is accessed by unauthorized persons!
Unauthorized persons ARE NOT familiar with the hazards in the working area as
described in these instructions.
There is a risk of death or severe physical injury.
Permit only authorized specialist personnel who are qualified and trained for the
operation to operate the cleaning device.
Keep unauthorized persons away from the working area of the plant/machine in which
the device is installed.
If in doubt, address these persons direct them to exit the working area.
Stop the work for as long as there are unauthorized persons in the working area.
WARNING
Risk of chemical burns and burns when opening the container!
The supply line is pressurized. The person may be struck by cleaning jets or come into
contact with residual fluid from the supply line and device. There may also be hot vapors
in the container.
There is a risk of death or severe physical injury.
DO NOT open the container during the cleaning process.
Before starting work, adhere to the working steps of the switch-off procedure
(see
Section 7.2 Switch-off
Procedure
).
Before opening the container, observe the cooling and draining time.
Use personal protective equipment (e.g. protective gloves, safety shoes, safety
goggles).
WARNING
Danger due to hot surfaces!
The device may heat up significantly as a result of the cleaning medium or the heat
transfer from the container. Contact with the device can cause burns on the skin.
There is a risk of burns from the cleaning medium at temperatures of more than + 60 °C
(+ 140 °F).
Comply with the warning signs and DO NOT touch the indicated areas.
Do NOT remove insulation from protected hot surfaces.
Maintain safety clearance of existing protective equipment or barriers.
Use protective equipment (e.g. protective gloves; cloths) to provide protection from the
hot surface.
Do not touch the device until after a sufficient cooling time.