Jet Cleaner TANKO-MX
12/102
Operating/Installation Instructions 2019/08
2 Safety
–
The operating company must provide personnel with personal protective equipment and make sure
that this is used (see
Section 2.4.1 Personal Protective Equipment
).
–
The operating company must make sure that the danger area of the higher-level plant in which the
device is installed is not accessible to unauthorized persons.
–
The operating company must make sure that no one is permitted to work on the device whose ability
to react is impaired by drugs, alcohol, medication or similar.
–
The operating company must take appropriate measures to inform groups of persons who are not
intended to come into direct contact with the device (e.g. visitor groups) about the potential dangers
involved.
–
The operating company is responsible for making sure that the device is only ever operated in
perfect condition.
–
Wherever high pneumatic pressures occur, there is a possibility of sudden failure of or damage to
the lines and connections. This poses a hazard. The operating company must instruct operating and
maintenance personnel at least once a year on the possible hazards.
–
The constructor of the overall plant must install the switching and safety devices required for setting
up, inspection, shutting down (including emergency shutdown), operation, maintenance, cleaning
and repair.
–
The operating company must design the disconnection of the energy sources on the higher-level plant
technically in such a way that the
Switch-off Procedure
described in
Section7.2
can be adhered to.
–
The operating company must define and adhere to the intervals for inspections and control
measures in accordance with the environment and media used.
–
The operating company must provide fire safety devices, e.g. the appropriate quantity of suitable
hand-held fire extinguishers of the appropriate size, in easily accessible places and provide
employees with training in fire safety.
–
Warnings in the documentation for externally supplied assembly groups must be adhered to and
incorporated into the risk assessments for the specific workplace.
–
For installation of the device in a plant, the operating company must guarantee safe access using
steps, platforms and rails in accordance with EN ISO 14122-1-3.
Connections:
Before operating the machine with the device, the operating company must make sure that the local
regulations are observed for assembly, installation and commissioning, if these tasks are performed by
the operating company.
Hydraulic connections must fulfill the requirements of EN ISO 4413.
Electrical connections must fulfill the requirements of EN 60204 -1.