AWH TANKO MX125, Operating & Installation Instructions Manual, Page: 70 / 112

Jet Cleaner TANKO-MX
62/102 Operating/Installation Instructions 2019/08 7 Maintenance
P
o
in
t
Inspection and Maintenance Work
In
te
rv
a
l
M
e
th
o
d
A
Check that the media connection [MC] / process connection [PA] and the
connection cover / housing connection are firmly attached.

Replace parts in the event of wear or damage.

Properly reattach loosened screw connections.
m
V
F
B
Check the plain bearings to make sure they are fully functional and for wear.

Clean or replace the collar bushings as necessary.
200
h
B
V
F
C
C
Check the threaded connection to make sure that it is firmly in place.

Properly reattach loosened screw connections.
m
V
F
D
Check the plain bearings to make sure they are fully functional and for wear.

Clean or replace the collar bushings as necessary.
200
h
B
V
F
C
E
Check that the gear unit is fully functional and wear on the teeth.

Check the bearing movement.

Replace parts in the event of wear or damage.
200
h
B
V
F
C
F
Check the plain bearings to make sure they are fully functional and for wear.

Clean or replace the collar bushings as necessary.
200
h
B
V
F
C
G
Check the plain bearings to make sure they are fully functional and for wear.

Clean or replace the collar bushings as necessary.
200
h
B
V
F
C
H
Check the plain bearings to make sure they are fully functional and for wear.

Clean or replace the collar bushings as necessary.
200
h
B
V
F
C
I
Check the threaded connection to make sure that it is firmly in place.

Properly reattach loosened screw connections.

The spiral circlip must be fully engaged in the groove.
m
V
F
J
Check the plain bearings to make sure they are fully functional and for wear.

Clean or replace the collar bushings as necessary.
200
h
B
V
F
C
K
Check the threaded connection to make sure that it is firmly in place.

Properly reattach loosened screw connections.

The spiral circlip must be fully engaged in the groove.
m
V
F
L
Check that the gear unit is fully functional and wear on the teeth.

Check the bearing movement.

Replace parts in the event of wear or damage.
200
h
B
V
F
C
M
Check the plain bearings to make sure they are fully functional and for wear.

Clean or replace the collar bushings as necessary.
200
h
B
V
F
C
N
Check the threaded connection to make sure that it is firmly in place.

Properly reattach loosened screw connections.
m
V
F
O
Check the threaded connection to make sure that it is firmly in place.

Properly reattach loosened screw connections.
m
V
F