Jet Cleaner TANKO-MX
40/102
Operating/Installation Instructions 2019/08
5 Installation
WARNING
Connections that are NOT screwed, such as separable connections with a clamp or grid
design can be unexpectedly loosened or mistakenly removed!
Liquids may penetrate or spray out and be carried over between zones.
There is a risk of severe physical injury.
Fluid and process connections in clamped or detent configuration must:
–
be self-locking (e.g. mechanical locking of a lever arm coupling with safety lock),
–
be provided with an additional securing mechanism to prevent them from coming loose
accidentally or
–
a tool or key is required for loosening (e.g. replace winged nut with nut)
WARNING
Risk of the device falling accidentally!
The device may strike personnel when falling.
There is a risk of severe physical injury.
Hold the device firmly when installing/removing it.
There must be nobody beneath the device when installing/removing it.
NOTE
Risk of dirt and foreign objects in the device!
Functional safety and reliability may be compromised.
During installation, make sure and check that there is no dirt or foreign objects in the device
(e.g. small particles, sealing material).
NOTE
No torque may be initiated into the device via the nozzles while the device is being
installed/removed! Lever action can cause a torque to be transferred via the nozzle carrier to the bevel
gear wheels.
The threaded connections of the bevel gear wheels could become loose.
When setting the device down with the downpipe fastened in place, make sure that the nozzles
ARE NOT under pressure due to the weight and length of the downpipe.
Clamp the downpipe in a vise so that the device can be fastened to or loosened from the downpipe.
Interface A
The supply line connection must be configured to be compatible with the media connection [MC] of the
device. The supply line for the cleaning agent must be fastened permanently and leak-tight to the media
connection [MC].