Cubola
®
Solidare
®
EN 20-04-2018
12
Assembly Cubola
®
Solidare
®
Sub-composition side guides
1.
Shorten the side guides to the correct lengths.
2.
Place the end cap front profile at the mounting position, make sure the front is flush with the end of
the side guide. Drill a hole of 6,5 mm through the hole in the end cap.
3.
Drill 2 holes of 7 mm, as shown below, to assemble the support beam to the top cover support.
4.
Stick each 400-500 mm 2x neoprene self-adhesive neoprene strips on the guides. Stick at the
bottom and 100 mm from the top a neoprene strip.
5.
Fasten the funnel side guide to the guides.
6.
Slide the PVC side guide in the side guide and install the guide plate.
