Cubola
®
Solidare
®
EN 20-04-2018
16
9.
Close both sides of the tensioning system with covers and fasten with M4x25 cylinder screws.
Sub-composition cassette with front profile
1.
At the operation side drill a hole of 11 mm in the bottom cover for the passage of the motor cable.
Make a rushing in the hole.
2.
Slide the mounting plates of the mounting brackets and the PVC inlay strip in the bottom cover. Screw
the top cover supports on the bottom cover with plate screws 4,2x32 mm. Fasten the aluminium
motor bracket and the PVC bearing block on the top cover supports.
3.
Slide the 2 fabric strings into the fabric.
4.
Roll the fabric bottom wise onto the roller.
5.
Install the cord pulleys.
