Cubola
®
Solidare
®
EN 20-04-2018
4
General information Cubola
®
Solidare
®
Determine the centre-to-centre size per unit
In order to determine the cut sizes, first measure the centre to centre size of each unit. A drawing with dimensions is
shown below.
For a more detailed view, see the cut size diagram and the enclosed cut lists.
Note: Mounting plates extend beyond the width and projection sizes. This is 5 mm for the wall mounting plate and
45 mm for the mounting plate of the post.
Dissimilar units
Note: In case of a connected system with dissimilar units placed in front or alongside one another, the outer size
minus the values stated above are divided over the number of units.
For example: Freestanding model with 2 units connected in width:
Total width = 10000 mm
The total CTC size is then 10000 – 110 mm = 9890 mm
If the first unit has a CTC size of 3000 mm, the second unit will be 6890 – 3000 = 3890 mm.
Cut sizes
The cut sizes apply to all configurations, including a connected or wall-mounted system. It is based on the CTC size
of each unit. The applicable sizes are listed in the cut size diagram shown on the following page
.
Diepte
HOH diepte
= Diepte
– 110 mm
Diepte
HOH diepte
= Diepte
– 10 mm
Hart tot wand = HOH diepte
– 45
Breedte (excl. montageplaten)
HOH breedte totaal
= Breedte totaal
– 110 mm
HOH breedte 1
HOH breedte 2
Depth
Depth
CTC depth
– depth -110 mm
CTC projection
= projection - 10
mm
C to wall = HOH projection
– 45
Width (excl. sketch plates)
Total CTC width
= width - 110 mm
CTC width 1
CTC width 2
Depth = CTC depth + 110 mm
CTC
projection
= depth - 110 mm
Supporting beam projection = CTC projection - 110 mm
CTC Width
H
e
ig
h
t
P
o
st
=
h
e
ig
h
t
–
1
0
m
m
H
e
ig
h
t
a
b
o
v
e
g
ro
u
n
d
l
e
v
e
l
D
e
p
th
b
e
lo
w
g
ro
u
n
d
l
e
v
e
l
Ground level
Fabric projection=
CTC projection - 110 mm
Guide =
CTC projection - 345 mm
CTC width
= width + 110 mm
Supporting beam/beam front = CTC width - 110 mm
Bottom cover = CTC width - 152 mm
Top cover/top cover extension = CTC width - 153 mm
Roller = CTC width
– 195 mm
Fabric in cassette = CTC width - 252 mm
Front profile = CTC width - 324 mm
Front profile cover = CTC width - 325 mm
Fabric in supporting beam = CTC width - 190 mm
Roller 63 = CTC width - 192 mm
Front profile = CTC width
– 135 mm
