Cubola
®
Solidare
®
EN 20-04-2018
3
General information Cubola
®
Solidare
®
Maximum dimensions (cm)*
Width unit
Projection unit
Height unit
Maximum per unit
600 cm
400 cm
300 cm
* = While the system in theory allows for endless connection in all directions, it is not possible to end both front
profiles at one profile.
Note: No joints are available for the fabric rollers, so each unit of max. 6000 x 4000 mm has 2 motors.
Fabric confection
The Solidare
is only available with acrylic fabric in panels. Without zipper, Soltis fabric is also available.
The fabric of the Solidare
is wound bottom wise.
The fabric in the front support beam is wound topwise (max. 800 mm projection).
Motor diagram
Width
Projection
150 to 300 cm
300 to 350 cm
351 to 400 cm
From 200 to 300 cm
40 Nm
40 Nm
From 301 to 400 cm
40 Nm
40 Nm
50 Nm
From 401 to 500 cm
40 Nm
40 Nm
50 Nm
From 501 to 600 cm
50 Nm
50 Nm
50 Nm
For the fabric in the support beam (valance) use at least 20Nm without fabric stretch compensation or
40Nm with fabric stretch compensation.
Mounting brackets
The number of mounting brackets depends on the width of the Cubola i.c.w. Solidare.
Width
Freestanding
Wall-mounted
200 to 400 cm
Set L+R freestanding
(4217420-…)
Set L+R wall-mounted (4217424-…)
400 to 500 cm
Set L+R freestanding (4217420-…)
1x centre (4217422-…)
Set L+R wall-mounted (4217424-…)
1x centre wall-mounted (4217426-…)
500 to 600 cm
Set L+R freestanding (4217420-…)
2x centre freestanding (4217422-…)
Set L+R wall-mounted (4217424-…)
2x centre wall-mounted (4217426-…)
