AvMap EKP-IV PRO User Manual Download Page 11

Page: 11 / 97

• Auto Zoom

• Map Presentation (Aero+Terrestrial, Aeronautical, Marine)

• POI Settings

• Selective and cycled Display

• VFR (Airports, VOR, NDB, Intersections, Vertical Obstructions, Aero Objects Id, Enroute

Communications)

• Airspace (Controlled Areas, Restricted Areas, FIR & UIR, MORA)

• Land (Roads, Road Labels, Railroads, City Names, Rives and Lakes, Cultural Features, Natural

Features, Landmarks, POI Objects)

• Marine (Lights, Chart Boundaries, Bathymetric & Soundings, Bathymetric & Soundings Range,

Depth Area Limit, Navigational Aids, Attention Areas, Tracks & Routes)

• Other Settings (User Points, Objects Overlap, Lat/Lon Grid)

Fix Functions

• DGPS

• WAAS

• Fix Symbol user selectable (Standard, Plane, Helicopter, Car)

• Static Navigation

• Course Predictor

• Map Orientation (Track-up, Course-up, North-up)

• Projected Radial

• A-B measurement

Data Page Options

• Nav/Location

• HSI Page

• Flight Plan

• GPS Page

• About Page

Special Functions

• Automatic Info (Aero+Terrestrial, Aeronautical, Terrestrial, Marine)

• Nearest search

• Direct-To navigation

• Date and Time Format

• Astronomic Data Calculation (Sun/Moon Info)

• Distance Unit selection (KM, NM, SM)

• Speed Unit selection (MPH, KTS, KMH)

• Altitude Unit selection (FT, FL, MT)

• Depth Unit selection (FT, FM, MT)

• Fuel Unit selection (GAL, LIT, LB, KG, BGAL)

• Descent Rate selection (FT/MIN, M/S, DEG)

• Temperature Unit (C/F)

• Alarms handling (Arrival, XTE, Waypoint Alarm Radius, Airspace)

• Database(Airports, VOR, NDB, Intersections, POI objects, User Waypoints, File Manager)

• Calculator (Countdown Timer, Elapsed Timer, Trip Computer, Vertical Navigation, Wind

Calculation, Fuel Consumption)

• Simulation mode (Speed, Heading)

• Checklists (Engine Start, Ground Check, Pre Take-Off, Landing)

• Communications (Waypoints Upload/Download, Flight Plan Upload/Download, Track Upload/

Download)

Interface

• Serial I/O port

Summary of Contents for EKP-IV PRO


































































































Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands

AvMap EKP-IV PRO, User Manual

Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands