AvMap EKP-IV PRO User Manual Download Page 71

Page: 71 / 97

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “STATIC

NAVIGATION” + ‘ENTER’

14.2.5 Course Predictor

The EKP-IV will display a line with a circle at the end to indicate the position your aircraft will reach

at the set time, based on current direction of travel and speed. This is continuously updated to

account for changes.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “COURSE

PREDICTOR” + ‘ENTER’

Setting options are: OFF, INFINITE, 1 MIN, 3 MIN, 6 MIN, 10 MIN, 30 MIN, 1 HOUR, HOURS.

The default setting is 10 MIN.

14.2.6 head Up Response

The Head Up Response is related to the Track-up mode of operation. When displaying the position

fix in Track-up, the setting selected here will enable the heading to vary +/- the degree selected

before the map is redrawn. A higher number here will result in less redraw time.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “HEAD

UP RESPONSE” + ‘ENTER’

Setting options are: +/-5, +/-10, +/-15, +/-45, +/-90. The default setting is +/-15.

14.3 ALARM SEt-UP

The EKP-IV provides alarm settings for various functions. Here you can set the system for your

navigational requirements.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “ALARM SETUP” + ‘ENTER’

14.3.1 Arrival Alarm Radius

Specifies the radius of a circle around the Waypoint of a Route: when your aircraft reaches a point

within this circle an alarm sounds and the Waypoint Arrival box appears on screen.

To set this alarm:

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “ALARM SETUP” + ‘ENTER’ +

“ARRIVAL ALARM RADIUS” + ‘ENTER’

After pressing ‘ENTER’ a box will appear with 00.00. Using the cursor key select the number desired

and press ‘ENTER’. The default setting is Off (00.00).

14.3.2 XtE Alarm Range

Specifies the distance your Cross Track Error (XTE) can vary before the sound of an alarm.

To set this alarm:

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “ALARM SETUP” + ‘ENTER’ + “XTE

ALARM RANGE” + ‘ENTER’

After pressing ‘ENTER’ a box will appear with 00. Using the cursor key select the number desired

and press ‘ENTER’. The default setting is Off (00).

14.3.3 Waypoint Alarm Radius

Specifies the radius of a circle around the User Waypoint: when your aircraft reaches a point within

Summary of Contents for EKP-IV PRO


































































































Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands

AvMap EKP-IV PRO, User Manual

Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands