AvMap EKP-IV PRO User Manual Download Page 68

Page: 68 / 97

14 thE SYStEM SEt-UP MENU

The System Setup Menu allows the user to change how the EKP-IV displays information. System

Setup options are arranged in sub-menus. For example, all options that relate to the Fix functions

are in Fix Setup sub-menu and all options related to time or date are in Date Time Setup.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’

Once you are in the System Setup Menu, use the cursor key to highlight the sub-menu desired and

press ‘ENTER’ to activate or to proceed to the next selection.

Fig. 14 - The System Setup Menu

14.1 GENERAL SEt-UP

The General Setup sub-menu controls the EKP-IV settings.

> ‘MENU’ 1 sec.+ “SYSTEM SETUP” + ‘ENTER’ + “GENERAL SETUP” + ‘ENTER’

14.1.1 Beeper

The EKP-IV makes a beep with each key press, warning or alarm message.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “GENERAL SETUP” + ‘ENTER’ +

“BEEPER” + ‘ENTER’

Use the cursor key to select and ‘ENTER’ to accept. The Off selection of this menu will turn all

beeper sounds Off. The default setting is On.

Summary of Contents for EKP-IV PRO


































































































Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands

AvMap EKP-IV PRO, User Manual

Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands