AvMap EKP-IV PRO User Manual Download Page 23

Page: 23 / 97

3 thE MoVING MAPS

The Moving Map is the default state of the software. This mode displays the Moving Map screen

and Data Window. The Moving Map displays map detail in Home, Auto Zoom or Cursor mode.

The operation mode will determine the options available within the screen. The Data Window

contains the navigation information pertaining to the active flight; these fields can be customized.

From the Moving Map screen you can obtain Automatic Info and Full Info for Database objects.

Here you can also open the Cursor/Position Menu for features related to Flight Plans, Waypoints

and airspace.

3.1 oPERAtING MoDES

3.1.1 Cursor Mode

In Cursor mode the screen is controlled by your movement of the cursor. When in Cursor mode, a

data field line will appear under the Data Window providing LAT/LON of the cursor position. If a fix

has been computed, a distance and bearing will also appear from the position fix to the cursor.

When in Cursor mode it is possible to scroll on the map such that the position fix will not be

displayed on the screen. When this occurs, you can quickly display your position by activating

Home mode (press ‘CLEAR’ once). At this time, the system will operate in Home mode (see below

Par. 3.1.).

If you have a position fix, and would like to continue with the cursor at the last position, press

‘CLEAR’ again (if the cursor key have not been pressed between these two ‘CLEAR’ presses, the

cursor will revert to the original position). To activate the cursor from the current fix position, simply

press the cursor key and the Cursor mode becomes active at the present fix position. The cursor can

be used to create and edit Waypoints and Flight Plans; identify airspace, obtain info about objects,

project radial lines and measure distance (see Cursor Menu, Par. 3.6).

3.1.2 home (Screen Amplifier) Mode

The Home mode (also called Screen Amplifier) is used to keep the fix position within the visible

map. The map is scrolled and redrawn automatically as your position moves. When this mode is

active the cursor is hidden. When in Home mode, there will be no position line displayed at the

bottom of the Data Window

Note

Auto Zoom must be selected to Off in the Moving Map Menu.

A slow flashing airplane icon will indicate your current position. The airplane will be pointing in the

direction of movement. Home mode can display the map in North-up, Course-up or Track-up (see

Moving Map Settings, Par. 3.5). To deactivate Home mode press ‘CLEAR’ activating the cursor at the

previous position or press a cursor key to enable the cursor under the current fix position.

3.1.3 Auto zoom Mode

The Auto Zoom mode is used to keep the fix position and destination (Target) visible on the map.

The map is scrolled and zoomed automatically to keep the best view possible. When this mode is

active the cursor is hidden. When in Auto Zoom mode, there will be no position line displayed at

the bottom of the Data Window.

Note

Auto Zoom must be selected to On in the Moving Map Menu.

Summary of Contents for EKP-IV PRO


































































































Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands

AvMap EKP-IV PRO, User Manual

Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands