AvMap EKP-IV PRO User Manual Download Page 32 | Manualshive

Page: 32 / 97

background image

3

> ‘MENU’ + “VFR/AIRSPACE/LAND/MARINE/OTHER SETTINGS” + ‘ENTER’

3.5.10.1 VFR Settings

The VFR Settings category relates to the aviation features found in the Navdata Compact Flash.

Airports

:

ON/OFF. The default setting is On.

VoR

:

ON/OFF. The default setting is On.

NDB

:

ON/OFF. The default setting is On.

Intersections

:

ON/OFF. The default setting is On.

Vertical obstructions

:

ON/OFF. The default setting is On.

Aero objects Id

:

OFF/SMALL/MEDIUM/LARGE. The default setting is Large.

Enroute Communications

:

ON/OFF. The default setting is On.

Note

The VFR Reporting points can be used as Route waypoints.

3.5.10.2 Airspace Settings

IThe Airspace Settings category relates to the airspace data found in the Navdata Compact Flash.

Low Airways: ON/OFF. The default setting is Off.

Note

Low Airways are only displayed below 50 Nm.

The Airline Airway, Control Airway and Direct Route Airway are displayed below 5 Nm.

This is the default setting. It is also possible to select them in the 50 Nm, 0 Nm, 10 Nm map scales.

The Official Designated Airway and RNAV Airway are displayed below the 50 Nm map scale.

To change from default settings, select ‘MENU’ + ‘SELECTIVE DISPLAY’, and scroll-down to any

of the following:

1. Airline Airway

. Control Airway

3. Direct Route Airway

4. Official Designated Airway

5. RNAV Airway

Refer to Section 3.5.1 for detailed information on how to customize the map display settings.

When routing to a specific leg, the Airline Airway, Control Airway, Direct Route Airway and Official

Designated Airway are displayed in blue, while the RNAV Airway (Area Navigation) are displayed

in purple.

Important Note

: When the Low Airways are enabled, the Land Elevation (shading) display will be

disabled below the 50 Nm map scale. The land elevation can be determined by moving the cursor

to any area on the map display, and the elevation for that location will be displayed.

The QUICK INFO window gives you the data that refers to the selected airways. They are:

1. The Low Airways name

. The outbound course: from the starting point of the selected airway leg

3. The length of the leg

4. The minimum altitude of the leg

In the QUICK INFO window, you may get duplicate information about the same airway. This

«
...
30
31
32
33
34
...
»

Summary of Contents for EKP-IV PRO


































































































Reviews:

No comments

Related manuals for EKP-IV PRO

ALLROUND Finder 4G

Brand: PAJ GPS Pages: 3

Brand: V7 Pages: 13

Brand: PassTime Pages: 15

Brand: IntelliTrac Pages: 8

Brand: Brunton Pages: 128

Brand: Flymaster Pages: 66

Brand: Xtrons Pages: 12

Brand: Xtracer Pages: 10

NavMate Car GPS Receiver

Brand: Horizon Navigation Pages: 68

Brand: ULBOTech Pages: 26

Brand: Laipac Pages: 64

Brand: XAiOX Pages: 13

Brand: NAVTEQ Pages: 52

Brand: SkyCaddie Pages: 16

Brand: B & G Pages: 44

GPS SPEED CAMERA WARNING DEVICE RCD-1000

Brand: RoyalTek Pages: 18

Brand: Standard Horizon Pages: 2

Brand: Parrot Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands