AvMap EKP-IV PRO User Manual Download

Page: 16 / 97

To deactivate, press ‘GOTO’ and select “DEACTIVATE”.

1.3.7 Database

The Database function allows the user to access information stored in the data cartridges on

Airports, VOR’s, NDB’s, Intersections and User Waypoints. Searching the Database allows the user

to activate GoTo Flight Plans and locate the item on the map. There are two methods of accessing

the Database information. The first is through the Database function within the Main Menu and the

second is directly from the Moving Map display (see Chapter 3).

1.3.8 Battery Compartment and Batteries

The EKP-IV is designed with a battery compartment for 6 rechargeable AA batteries. It is located

in the rear of the unit underneath the removable knee mount. The unit provides a ‘trickle’ charge

to the batteries when the unit is plugged into external power and powered ON. Rechargeable AA

batteries are required. Install them only after the batteries are fully charged. With fully-charged

batteries, the normal discharge time will be close to two hours, depending upon the condition of

the batteries, as well as the brightness and contrast of the screen settings. AvMap highly recommends

that NiMH AA batteries be used (available from AvMap/Navigation, or from any electronics shop).

DO NOT USE ALKALINE BATTERIES, as they may damage the unit and void the warranty.

Summary of Contents for EKP-IV PRO


































































































Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands

AvMap EKP-IV PRO, User Manual

Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands