AvMap EKP-IV PRO User Manual Download

Page: 10 / 97

1 INtRoDUCtIoN

If you have not used a GPS Charting System before and intend to use your EKP-IV for navigating, we

suggest that you read this User Manual and make sure you are familiar with its contents. Throughout

this User Manual, the keys are shown in capital letters enclosed between single inverted commas,

for example ‘MENU’. Menu operations are in bold characters listed by keys sequence with the

menu names enclosed between quotes, for example ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’

+ “FIX SETUP” + ‘ENTER’ means: press and hold down the ‘MENU’ key for 1 second, using the

cursor key selects the System Setup menu, press ‘ENTER’, using the cursor key selects the Fix Setup

menu and then press ‘ENTER’.

1.1 FEAtURES

This electronic charting system integrates the remarkable accuracy of a GPS receiver with a detailed

moving map into a single, easy-to-use, computerized electronic map system. The EKP-IV contains a

built-in base map with coast/shorelines, names of states, major cities, highways, lakes and rivers.

When the EKP-IV is first opened, please check it for the following contents:

• C-MAP Navdata Compact Flash (inserted in the slot at the base of the unit)

• Antenna and 5 meter cable with SMB connector

• Power Cable (with cigarette lighter adapter)

• Velcro Leg Strap

• User Manual

Optional Accessories:

• PC/Data cable

1.1.1 Specifications

Main Characteristics

Recordable Individual points

• Waypoints :1000

• Type of User Waypoint Icons :16

Flight Plans

• Flight Plans : 10

• Max Waypoints per Flight Plan : 100

Tracking

• Tracks: 1

• Track Colors : 7

• Points per Track : many thousand of points

• Step by Distance : Auto, 0, 100, 500 Mt, 1Km; 5, 30 Sec, 1 Min

Cartographic Functions

• Worldwide Background

• Built-in Continental Cartography

• Coordinates System (DDD MM SS, DDD MM.mm, DDD MM.mmm, UTM, OSGB, MGRS)

• North Reference

Summary of Contents for EKP-IV PRO


































































































Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands

AvMap EKP-IV PRO, User Manual

Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands