AvMap EKP-IV PRO User Manual Download Page 70

Page: 70 / 97

14.1.8 Layout

The EKP-IV has the capability to orient the display in the Vertical or Horizontal mode.

The Vertical mode is the default in order to use the unit with the attached leg mount.

The Horizontal mode can be used when the unit is placed on the panel or using one of the R-A-M

mounting options. While in the Moving Map Mode :

>’MENU’ 1 sec. + “SYSTEM SETUP” + ‘MENU’ + “GENERAL SETUP” + ‘ENTER’ +

“LAYOUT” + ‘ENTER’ + “VERTICAL” or “HORIZONTAL”

An information screen will appear to ensure the desire is to change and to notify that the unit will

restart. The Warning Page will show; hit ENTER to have the Moving Map appear. The unit will

restart in the new display mode selected.

14.2 FIX SEt-UP

The Fix Setup sub-menu contains options relating to GPS data input and display.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’

14.2.1 Fix Source

The EKP-IV uses positioning information provided by the internal GPS-receiver or by an external

NMEA 0183, external Air Data, or External RNAVdata string.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “FIX

SOURCE” + ‘ENTER’

Use the cursor key to select and ‘ENTER’ to accept. When connecting the EKP-IV to an external

source, be sure the data output of the external device is set for the correct format (see Sec. .5).

The default setting is Internal GPS.

14.2.2 Differential Correction Source

The EKP-IV can be connected to a DGPS Beacon Receiver that sends RTCM-104 data. To select the

Differential Correction source:

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ +

“DIFFERENTIAL CORRECTION SOURCE” + ‘ENTER’

Options are: NONE, WAAS, RTCM 100, RTCM 400, RTCM 4800, RTCM 9600, RTCM 1900,

RTCM 38400. The default setting is NONE. WAAS corrections are handled by the internal GPS

receiver and do not require additional equipment.

14.2.3 Fix Symbol

A flashing icon on the Moving Map displays the GPS position fix.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “FIX

SYMBOL” + ‘ENTER’

This setting allows you to select among a Plane or Standard (circle with an “X”) icon. The default

setting is Plane.

14.2.4 Static Navigation

A GPS-receiver can produce speed settings that are minimal when standing still. The Static

Navigation sets a threshold for the speed. When the speed received from the positioning device is

under 0.89 knots, the EKP-IV displays zero. The default setting is On.

Summary of Contents for EKP-IV PRO


































































































Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands

AvMap EKP-IV PRO, User Manual

Search results

Summary of Contents for EKP-IV PRO

Reviews:

Related manuals for EKP-IV PRO

Brands by name

Popular brands