Compu-Dobby 5 User’s Manual
Additional Functions: K-Series Loom
Warping the Loom
Page | 55
2)
Open the Weaving tab. You do not need to have a weaving file
open.
Note:
If you open a file for weaving (see page 24) when the loom is powered off, the
loom will automatically power on.
3)
Click Power to boot up the loom.
4)
The loom will begin its self-tests. At the same time, the button will
gain a checkmark and the Power light on the interface will turn
briefly yellow, then red.
5)
Click the free warp tension button.
6)
The button will turn red to indicate it is activated. Click the button
again to turn it off.
Summary of Contents for Compu-Dobby 5
