Compu-Dobby 5 User’s Manual
Weaving with the Compu-Dobby 5
Open a file for Weaving
Page | 25
2)
Click a file from the list to select it.
3)
Click Open for Weaving. The Weaving tab will open with your
selected file as shown in the next screenshot.
Note:
You can also double-click a file to open it for weaving.
Power
When you power on the loom using the software, the loom will go through a
solenoid self-test. Once the self-test is complete, you will be able to continue
using the software.
Note:
If you open a file for weaving (see page 24) when the loom is powered off, the
loom will automatically power on.
The Power button is used to turn weaving mode on/off. It is not used to
completely Shutdown the loom. Shutting down the loom is done through the
utilities tab and is only needed when preparing the loom to be unplugged
from power.
1)
Click Power to boot up the loom.
Summary of Contents for Compu-Dobby 5
