Connecting to the Loom
Compu-Dobby 5 User’s Manual
Page | 20
Shutdown the loom
S
HUTDOWN THE LOOM
If you will be removing the loom from a power source, you should shutdown
the loom using the commands in the software first. This is similar to shutting
down a computer so that it restarts correctly.
1)
In the software, go to the Utilities tab.
2)
Click Shutdown.
3)
Once the loom has completed the shutdown sequence, you can
remove power from the loom.
U
SING
W
EAVEPOINT
Weavepoint 8.0.2.0 and above offers direct access to AVLDrive for your loom
with Compu-Dobby 5. The loom control function in Weavepoint will open the
software, and upload the pattern you have open in Weavepoint.
Note:
Weavepoint is a Windows-based program. If you want to activate AVLDrive
directly from Weavepoint, you will need to use a Windows-based device.
AVLDrive only works with WIF files. When a file is opened in AVLDrive using
WeavePoint, the file has been exported from WeavePoint as a WIF and
imported to AVLDrive. The WIF file will then be available on the File tab in
AVLDrive for future use.
Set Weave Options in WeavePoint
1)
Select Options on the Weave menu to open the Weave Options
dialogue box.
Summary of Contents for Compu-Dobby 5
