Avitel 5303, Installation Manual

Page: 34 / 64

34
© 2008 Directed Electronics. All rights reserved.
Transmitter/receiver Learn Routine™
The system comes with transmitters that have been taught to the receiver. The
receiver can store up to 4 different transmitter codes in memory. Use the follow-
ing learn routine to add transmitters to the system.
The learn routine may be locked if previously programmed using the Bitwriter®.
If the siren generates one long chirp when attempting to program the unit, the
learn routine is locked and must be unlocked using the Bitwriter® before pro-
ceeding.
The Valet/Program switch, plugged into the blue port, is used for programming.
There is a basic sequence to remember whenever programming this unit: Door,
Key, Choose, Transmit and Release.
Open a door. (The GREEN wire, h1/8, or 1.
the VIOLET, H1/6 must be connected.)
Insert the key. Turn the ignition to the ON 2.
position. The heavy gauge pink wire must be con-
nected.
Choose. Within 10 seconds, press and release the 3.
Program switch corresponding to the number of
the desired function step listed in the following table.
Once you have selected the function step, press the switch once more and hold
it. The LED flashes and the horn honks to confirm the selected functional step. Do
not release the Program switch.