126
Step 4. Disable the “Line” test pattern by selecting “Off” to allow input signal source to be displayed.
Step 5. For benefit of duplicating 1
×
2 or 2
×
2 wall display configuration to 100m (328ft) distance –
For a 1
×
2 wall display configuration –
Connect an Ethernet cable from Card ID 4 HDBaseT 1 port to the first Pacific X-HDUR
HDBaseT port; then connect a monitor to the HDMI OUT / DVI OUT port.
Connect an Ethernet cable from Card ID 4 HDBaseT 2 port to the second Pacific X-HDUR
HDBaseT port; then connect a monitor to the HDMI OUT / DVI OUT port.
For a 2
×
2 wall display configuration –
Connect an Ethernet cable from Card ID 3 HDBaseT 1 port to the first Pacific X-HDUR
HDBaseT port; then connect a monitor to the HDMI OUT / DVI OUT port.
Connect an Ethernet cable from Card ID 3 HDBaseT 2 port to the second Pacific X-HDUR
HDBaseT port; then connect a monitor to the HDMI OUT / DVI OUT port.
Connect an Ethernet cable from Card ID 4 HDBaseT 1 port to the third Pacific X-HDUR
HDBaseT port; then connect a monitor to the HDMI OUT / DVI OUT port.
Connect an Ethernet cable from Card ID 4 HDBaseT 2 port to the fourth Pacific X-HDUR
HDBaseT port; then connect a monitor to the HDMI OUT / DVI OUT port.
B.2 Software
Configuration
Step 1. Assign the grouping
For a 1
×
2 wall display configuration;
assign the 3 Titan 9000 – (4H cards) to the same group and,
assign the Titan 9000 – (HOB card) to a group by itself.
For a 2
×
2 wall display configuration,
assign the 2 Titan 9000 – (4H cards) to the same group and,
assign the 2 Titan 9000 – (HOB cards) to the same group.
