Avitech Titan 9000 series User Manual Download Page 152

Page: 152 / 172

146

Step 9. Click “Change” in “Layout & Alarm Trigger.”

Click to select (with checkmark) the L(eft) and R(ight) Meter 1/2 / 3/4 to monitor. Then click OK

to exit.

Step 10. To enable alarm sound playback, click “Start Alarm Sound (System)” icon

(this functions as the main switch – will become grayed-out).

To shut off alarm sound playback before the time set has elapsed (duration), click

“Stop Alarm Sound (System)” icon (will become grayed-out).

Right-click an item (with

icon) on the Properties window (except with

icon) and click the following to

quickly apply the settings to

all the windows (Card

All)

to a particular window (Card

Image 1/2/3/4)

all the cards belonging to the same (Group)

to the entire (System)

Summary of Contents for Titan 9000 series













































































































































































Search results

Summary of Contents for Titan 9000 series

Reviews:

Related manuals for Titan 9000 series

Brands by name

Popular brands

Avitech Titan 9000 series, User Manual

Search results

Summary of Contents for Titan 9000 series

Reviews:

Related manuals for Titan 9000 series

Brands by name

Popular brands