132
Important principles to consider when “SDI Out Type” (for Rainier 3G Plus card) and “HDMI Out Type” (for
Rainier 3G Plus and Titan 9000 cards) is available for setting (not grayed out):
1. Upon setting one card in group for Rainier 3G Plus (–Q card) and
“System
Æ
Options
Æ
HDMI audio output follow SDI audio output
Æ
Off”.
Both “SDI Out Type” and “HDMI Out Type” is available for setting.
2. a. For previous SDI Cascade In control board version –
Upon setting 2 or more cascaded cards in a group (both internal and external cascade).
b. For new HDMI Cascade In control board version –
Upon setting 2 to 4 cascaded cards in a group (internal cascade only).
c. When one card in group and “System
Æ
Options
Æ
HDMI audio output follow SDI audio output
Æ
Off”
“SDI Out Type” is grayed out but “HDMI Out Type” is available for setting.
3. Upon setting 2 or more cascaded cards in a group (external cascade only), and one of the chassis is the
new HDMI Cascade In control board version.
Both “SDI Out Type” and “HDMI Out Type” is grayed-out.
Important principles to consider when “HDMI Out (Display Source)” is set at “Cascade In” –
Scenario 1:
Upon setting one card in group, then “Card Parameters”
Æ
”Embedded Audio”
Æ
”HDMI Out Type” will
automatically be set at “Pass through embedded audio” to allow HDMI output signal to contain both video
and audio signals.
Scenario 2:
Upon setting two or more cards in group, then “Card Parameters”
Æ
”Embedded Audio”
Æ
”HDMI Out Type”
will automatically be set at “Pass through embedded audio” but HDMI output signal only contain video
signal and no audio signal.
