Avision AD6090 User Manual Download Page 89

Page: 89 / 155

User’s Manual

4-52



Continue

Scan(Discard

Image):

If the image of the multi-feed

page is not acceptable, select

[

Continue Scan (Discard

Image)

] to scan the rest pages

yet the multi-feed page will be

ignored and you need to rescan

the page again.



Stop Scan:

The scanner stop scans. Remove

the remaining pages in the

scanner. Remove staples or any

adhesive tapes on your

document. Or fan your document

and rescan the rest pages.



Multi-Feed Alarm

If a wave file is added, the scanner will make a sound

alarm if multi-feed is detected yet no Warning dialog box

will be displayed.

How to add the sound alarm

：

1. Click the Browse button on the right side of the speaker icon.

The Open dialog box appears.

2. Choose your wave file.
3. Click the Open button. The wave file is added.

Units

Defines the primary measurement system.

Inches,

Millimeters,

and

Pixels

are available.

Summary of Contents for AD6090




























































































































































Search results

Summary of Contents for AD6090

Reviews:

Related manuals for AD6090

Brands by name

Popular brands

Avision AD6090, User Manual

Search results

Summary of Contents for AD6090

Reviews:

Related manuals for AD6090

Brands by name

Popular brands