Avision AD6090 User Manual Download Page 4

Page: 4 / 155

User’s Manual

European Union Regulatory Notice

Products bearing the CE marking comply with the following EU

Directives:



Low Voltage Directive 2014/35/EC



EMC Directive 2014/30/EC



Restriction of the use of certain hazardous substances (RoHS)

Directive 2011/65/EU

CE compliance of this product is valid if powered with the correct

CE-marked AC adapter provide by Avision.

This product satisfies the Class A limits of EN55032, EN55035,

and safety requirements of EN62368-1.

CE Warning

This is a class A product. In a domestic environment this product

may cause radio interference in which case the user may be

required to take adequate measures.

*This machine is certified as Class 1 LED product.

Summary of Contents for AD6090




























































































































































Search results

Summary of Contents for AD6090

Reviews:

Related manuals for AD6090

Brands by name

Popular brands

Avision AD6090, User Manual

Search results

Summary of Contents for AD6090

Reviews:

Related manuals for AD6090

Brands by name

Popular brands