User’s Manual
2-5
2.5
Connecting to Computer
1.
Connect the
square
end
of the USB cable to the USB port of
your scanner. Connect the
rectangle end
to the USB port at
the rear side of your computer.
Note:
The scanner is designed with a USB 3.2 GEN 1X1
interface to ensure the optimal speed. If your computer
comes with a USB 3.2 GEN 1X1 port, make sure to connect
the scanner to your computer to the USB 3.2 GEN 1X1 port
which is distinguished in blue color at the back of your
computer. The USB 3.2 GEN 1X1 port enhances your
scanning speed and is also compatible with USB 2.0 and
USB 3.0.
2.
The computer should detect a new USB device and prompt a
“New Hardware Found”
message.
3.
By following the on-screen instructions, click the
Next
button to continue. When the certification screen appears,
click
Continue Anyway
to complete the installation.
4.
When the
Finish
dialog is prompted, click the
Finish
button.
Summary of Contents for AD6090
