Avision AD6090 User Manual Download Page 3

Page: 3 / 155

User’s Manual

iii

Federal Communications Commission (FCC) compliance

information statement

Part 15

The product has been tested and found to comply with the limits

for a Class A digital device pursuant to Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference and (2) this device

must accept any interference received including interference that

may cause undesired operation.

The FCC Class A limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual

may cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Summary of Contents for AD6090




























































































































































Search results

Summary of Contents for AD6090

Reviews:

Brands by name

Popular brands

Avision AD6090, User Manual

Search results

Summary of Contents for AD6090

Reviews:

Brands by name

Popular brands