Avidyne IFD510 Pilot'S Manual Download Page 283

Page: 283 / 474

IFD500 Series Pilot Guide

Aux Subsystem 5-47

Datablock Item Title

and Image

Content

ETA at Destination

Estimated time of arrival at the
“Destination” waypoint.

To Waypoint ETA

stimated time of arrival at the “To”

waypoint.

Destination ETE

Estimated time enroute (along flight
planned route

) to the “Destination”

waypoint.

To Waypoint ETE

Estimated

time enroute to the “To”

waypoint.

GPS CDI

Current track, desired track for active
flight plan leg and visual depiction of
deviation.

Note that the CDI displayed in this
datablock is

always

based on GPS

and is

never

a VHF CDI.

Summary of Contents for IFD510



























































































































































































































































































































































































































































































Search results

Summary of Contents for IFD510

Reviews:

Avidyne IFD510, Pilot'S Manual, Page: 283 / 474

Search results

Summary of Contents for IFD510

Reviews: