CRANE
CO.
280
N.
MIDLAND
AVE.,
STE
258,
SADDLE
BROOK,
NJ
07663
WWW.AVIDCONTROLS.COM
12/17/12
TECH-440/D.W.O. 23135
Page 15 of 55
Figure 3-6
To Center the Positioner
1. Stroke the actuator to its upper limit and place a mark on the actuator’s yoke that
lines up with the red arrow on the magnet assembly.
2. Stroke the actuator to its lower limit and place a mark on the actuator’s yoke that
lines up with the red arrow on the magnet assembly.
3. Place a third mark on the yoke centered between the upper and lower limit marks.
4. Lastly, mount the positioner to the bracket so that the positioner sensor (nose) of
the SmartCal lines up with the midpoint mark. (See Figure 3-6).
3.4 Mounting Remote Positioner on a Linear Actuator
SmartCal
