CRANE
CO.
280
N.
MIDLAND
AVE.,
STE
258,
SADDLE
BROOK,
NJ
07663
WWW.AVIDCONTROLS.COM
12/17/12
TECH-440/D.W.O. 23135
Page 13 of 55
Step 4.
Mount positioner at a remote location.
Step 5.
Remove the electronic canister cover by unscrewing (2) mounting screws.
(Appendix B: Procedure to Remove Electronics Cover and Electronic Canister)
Step 6
. If necessary cut remote cable to required length, making sure to cut end opposite
female connector. Wire the positioner sensor back to the positioner using the cable
provided and replace cover. (See Figure 3-4).
Figure 3-4