CRANE
CO.
280
N.
MIDLAND
AVE.,
STE
258,
SADDLE
BROOK,
NJ
07663
WWW.AVIDCONTROLS.COM
12/17/12
TECH-440/D.W.O. 23135
Page 12 of 55
3.2 Mounting Remote Positioner on a Rotary Actuator
Step 1.
Mount bracket and visual indicator to positioner as described in Section 3.1 Step
1.
Step 2.
The visual indicator needs to be properly oriented. Use the symbols on the bottom
of the indicator to mount as shown in Condition 1 or Condition 2. (see figure 3-3).
Condition 1 and Condition 2 show the placement of the indicator with respect to the
positioner housing while the actuator is in the fail position.
Step 3.
Mount the positioner with Modmount bracket to the actuator. As stated in Step 2
make sure that the position sensor is mounted in a fashion that properly orients it with
respect to the indicator.
Figure 3-3
