Avid Technology AirSpeed series, Installation And User Manual

Page: 95 / 282

AirSpeed Multi Stream Configuration
95
t
If Cue Item is selected, you can cue the clip instead of playing the clip directly for
the channel with focus by double-clicking on a clip in the database, dragging and
dropping a clip from the database to the MiniMonitor, or dragging and dropping a
clip between the MiniMonitors. To play the cued clip, press F12, select Air > Take,
or press the space bar.
7. (Option) In the Stop Behavior field, select the check box to activate the menu for you to
select the stop behavior you want for clips on this channel. Options are Show Black, and
Show Last Frame.
n
If this channel is controlled by VDCP, and there is no clip loaded, and "Preset/Cue" is
enabled in the Protocol Setup dialog box, the clip will be loaded with the first frame shown
on the output.
8. (Option) In the Reference - Video Standard field, select the appropriate reference (REF
IN) connected to the AirSpeed Multi Stream.
9. (Option) In the DNx Ancillary Data section, configure channels for ancillary timecode
capture and playback.
For more information on how to configure channels to capture ancillary data timecode,
see
“Configuring Channels for Capturing Ancillary Timecode” on page 96 .
For more information on how to configure channels to play back ancillary timecode, see
“Configuring Channels for Playing Out Ancillary Timecode” on page 96 .
10. (Option) In the VITC Line Selection field, there are two fields:
t
In the PlayBack Line # field, select the playback line number that you want to
output VITC timecode to.
t
In the Record Line # field, select the record line number that you are supplying the
VITC timecode on.
11. When you are finished configuring this channel, repeat this procedure for each
additional channel that you want to configure.
12. Click OK to close the Channel Configuration dialog box.
n
If you change the video standard of the channel, you must restart the AirSpeed Multi Stream
application for the change to take effect.
13. (Option) If you want to lock channels to MiniMonitors to prevent accidental changes,
see “Locking Channel Assignments” on page 119 .
14. Restart the AirSpeed Multi Stream application for your video standards to take effect.
15. Next, if Transfer Manager is not launched you will need to launch it. For more
information on launching Transfer Manager, see “Launching Transfer Manager” on
page 105 .