1
AirSpeed Multi Stream Overview
34
The Power button shuts down and restores power to the AirSpeed Multi Stream server. The
Reset button restarts AirSpeed Multi Stream server, without powering off the AirSpeed
Multi Stream server. The functions of the 9 LEDs on the front of the AirSpeed Multi Stream
system are described in the following table:
LED
Description
State
Power
The Power LED is located furthest to
the right (to the left of the Avid logo
and to the right of the Power button).
This LED is tied to the AC power
system that indicates when the
AirSpeed Multi Stream chassis is
powered on.
•
Steady Green - Indicates power
on.
•
Dark - Indicates power off.
PS
Power Supply Status indicator
•
Steady Green - Indicates good
power.
•
Steady Amber - Indicates bad
power.
•
Blinking Amber - Indicates one
power supply is missing or no
AC.
SA
Not Used
TMP
Overheat
•
Steady Green - Indicates that the
AirSpeed Multi Stream is
working properly. No overheat
condition or fan failure.
•
Steady Amber - Indicates an
overheat condition.
•
Blinking Amber - Indicates fan
failure.
NET
Network Link
•
Steady Green - Indicates
successful log in to shared
storage and asset manager.
•
Blinking Amber - Indicates
failure to log in to shared storage
or asset manager.
Summary of Contents for AirSpeed series
