Avid Technology AirSpeed series, Installation And User Manual

Page: 229 / 282

Reimaging Your System
229
Installing the Avid Framework Workstation
This topic describes how to install the Avid Framework Workstation on the AirSpeed Multi
Stream server.
n
The Avid Framework Workstation must be installed before the AirSpeed Multi Stream
application software is installed.
This installation procedure also installs the following components on the AirSpeed Multi
Stream server:
• Avid Diagnostics
• Avid Health Monitor
• Avid Service Configuration
• Avid Workgroup Properties
n
Regardless of whether the AirSpeed Multi Stream is a capture and/or playback server,
ensure it is in the Interplay workgroup. If it is a playback server that will be controlled by
iNEWS Command, it must be configured to join a second workgroup—the same workgroup
as the Command Servers.
n
The AirSpeed Multi Stream device service can be configured to be controlled by up to two
Command systems.
Although there are no specific changes you need to make to the Avid Framework
Workstation for AirSpeed Multi Stream, if you want more information on configuring the
Avid Framework Workstation settings, see “Configuring Workstation Settings” in the
Avid
Service Framework User’s Guide .
To install the Avid Framework Workstation on the AirSpeed Multi Stream server:
1. Navigate to the Avid_Framework_Workstation folder in the AirSpeed Multi Stream
installation location for your site.
2. Double-click the Setup.exe to launch the installer. You will be asked if you want to run
this program.
3. Click Run.
The InstallShield Wizard opens to guide you through the rest of the installation process.
4. Click Next.
The Workgroup Name dialog box opens.