AVIATION DESIGN
- ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - [email protected] – www.adjets.com
20
Kevlar Fuel Tanks:
The Kevlar fuel tanks are pre build.
Connect the tubing and clunk.
Check that the clunk can move freely.
You have now to check that your fuel tanks have no leaks.
Fill them fully with kerosene and let them during 1 hour full of
fuel.
Check carefully that your fuel tanks have no leaks.
You will now have to install the fuel tanks in the front section
of the fuselage before proceeding with the assembly.
There are now two possibilities:
- If you fit the cockpit interior with floor, you will have to use
the two Kevlar tanks fitted under the two mains wing tubes.
- If you do not fit a cockpit interior, it is simpler to use one single large Kevlar fuel tank fitted on the top
of the two mains wing tubes
Glue the first plywood fuel tank mounting on the front
fiber tube
Glue the second plywood fuel tank mounting on the back
of the rear fiber tube
Fit the Kevlar fuel tank on the mounting and hold it with
rubber or plastic T rap
