AVIATION DESIGN
- ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - [email protected] – www.adjets.com
16
Assembling the fuselage gear support:
Cut the 2 main gear door
Insert the two plywood reinforcements
Insert the 20 mm x 30 mm gear support
wood spare through the fuselage
Fit the two wings on the fuselage and check
that the gear support fit correctly in the
wing plywood support.
Glue with slow epoxy and microballoon the
gear wood support tube and the two
plywood reinforcements.
Let it dry overnight.
Main Gear
Assemble the two wings to the fuselage
Put the model inverted
Put the 2 gear on their supports
Check that the gears retract and extend without problem. Adjust position if necessary
Trim fuselage and wings so that the gears do not touch them.
Drill the 4 x 2 mm hole for the gear screws
Screw the gear with four 4x20mm parker screw