AVIATION DESIGN
- ZI le Chenet - 91490 MILLY LA FORET – FRANCE - Tel : int+ 33 1 64 98 93 93 - [email protected] – www.adjets.com
3
Landing gear: ref: ADJ 635
Aviation Design
scale retractable landing gear is
specially designed for the Falcon 7X.
It is made in aluminum and steel.
It includes 3 retracts system, 3 scale oleo struts, 4 way
valve, tubing, connectors, air tank and filling valve.
Wheels set + brakes: ref: ADJ 637
This set includes:
4 x 130 mm diameter scale cover + four brakes.
CNC machined on bearings
2 x 55 mm diameter scale front wheel. CNC machined on
bearings
Includes valve, tubing, connectors, air tank, filling valve.
Gear door kit: ref: ADJ 638
Includes four air cylinders, electronic gear door cycler, 4-way valve, tubing, connectors, door hinges and
ball links.
Not included in the different package:
Self-adhesive foam tape
0.2 kg epoxy and glass fiber
ZAP CA
DISCLAIMER
AVIATION Design
assumes no liability for the operation and use of these products.
The owner and operator of these products should have the necessary experience and exercise common
sense. Said owner and operator must have a valid Model Airplane license and insurance, as required.
FIBREGLASS PREPARATION
The inside of the fuselage should be sanded with fresh #80-grit paper for best glue adhesion where
bulkheads and other attachments are fixed.
GLUING TECHNIQUES
All the plywood formers should be fitted with cyano adhesive and then glued with epoxy and glass fiber
tape. All other parts should be glued with epoxy.
