Avery Weigh-Tronix ZQ375 Checkweigher, User Instructions

Page: 84 / 94

84 ZQ375 Checkweigher User Instructions
Supervisor menu
Packrun
Check  Outputs  Out-gzb  USegDiv  OSegDiv  Prt tot  Tot Fmt
 Clr Tot  Digits  Graph  Stats  Packrun
32. Press UNITS to go to the next menu item …
PAcKrun is displayed. Use this to set the number of items in the
packrun.
33. Press SELECT …
The current packrun number is displayed.
34. Press ZERO to accept this or use the Numeric entry procedure on page 19 to
enter a new packrun number and press ZERO to accept …
PAcKrun is displayed.
Type
Check

Outputs

Out-gzb

USegDiv

OSegDiv

Prt tot

Tot Fmt

Clr Tot

Digits

Graph

Stats

Packrun

Type
35. Press UNITS to go to the next menu item …
TYPE is displayed. Use this to choose which type of checkweighing you
want to do: SAMPLE (default) or LiMitS .
Select SAMPLE mode (default) if you want to enter the Toler-Hi and
Toler-Lo and target weight in the PLU editor.
Select LiMitS if you want to enter the targ-lo and targ-hi and target
values.
36. Press SELECT …
The current choice is displayed.
37. Press PRINT or UNITS to toggle between the choices and when your choice is
displayed, press ZERO to accept …
TYPE is displayed.
Auto Tare
Check  Outputs  Out-gzb  USegDiv  OSegDiv  Prt tot  Tot Fmt
 Clr Tot  Digits  Graph  Stats  Packrun  Type  A-tare
38. Press UNITS to go to the next menu item …
A-tArE is displayed. Use this to disable or enable ( oFF (default) or on )
an auto tare when the target weight is reached. This allows you to add
items to a box or pallet and auto-tare the weight of each item if it falls in
the target range.
39. Press SELECT …
The current choice is displayed.