40
ZQ375 Checkweigher User Instructions
Checkweighing applications
4.
Clear the scale and place the next item on the scale …
The bargraph will show the item is under the target weight, over the
target weight or on target.
5.
Repeat step
through
for all the other items to be weighed.
View the Upper and Lower Tolerances
1.
To view the upper tolerance, press and hold
OVER
…
toL-hi
(high tolerance) is briefly displayed, then the value is briefly
displayed before the normal checkweighing mode returns.
2.
To view the lower tolerance, press and hold
UNDER
…
toL-Lo
(low tolerance) is briefly displayed, then the value is briefly
displayed before the normal checkweighing mode returns.
Set New Upper and Lower Tolerances
If the active PLU# is 0, you can set custom tolerances. Follow these steps:
1.
Press
UNDER
to set the lower or under tolerance …
x.xxx
is displayed. This is the under tolerance value. The
Under
segments also flash.
2.
Refer to the
Tolerance entry procedure on page 18
and key in a new tolerance.
Press
ZERO
to accept …
Display returns to checkweighing mode with the new lower tolerance
active.
3.
Press
OVER
to set the upper tolerance …
x.xxx
is displayed. This is the over tolerance value. The
Over
segments
also flash.
4.
Refer to the
Tolerance entry procedure on page 18
and key in a new tolerance.
Press
ZERO
to accept …
Display returns to checkweighing mode with the new upper tolerance
active.
You can escape from an entry screen or choice level. Press
F1
and the action is
aborted and the display returns to its previous state.
The tolerances can be set from 1 division to the capacity of the scale.
Summary of Contents for ZQ375 Checkweigher
Page 1: ...ZQ375 Checkweigher User Instructions AWT35 500812 Issue AC...
Page 93: ......
