ZQ375 Checkweigher User Instructions
63
7 Supervisor menu
This menu allows a supervisor to change those functions of an application that are
configurable. Access the supervisor menu using the password 1793. Refer to
Accessing the menus on page 49
for instructions.
The Supervisor menu changes based on the active application. Each is shown on the
following pages.
l
Supervisor menu for Sim375 application on page 64
l
Supervisor menu for Mid375 application on page 71
l
Supervisor menu for Adv375 application on page 78
l
Supervisor menu for Per375 application on page 89
l
Supervisor menu for the Grad375 application on page 91
Below is a chart showing how the keys are used in navigating through the menus.
There is an abbreviated version in next to each menu as a reminder of the key
functions.
Menu Navigation Keys:
Press
SELECT
/
to move down in a menu
Press
TARE
/
to move up in a menu, except at the
bottom item in a menu, then use
ZERO
/
or
F1
Press
/
to move left in a menu
Press
UNITS
/
to move right in a menu
Press
ZERO
/
to accept a value or choice and
move up in the menu.
Press
F1
to escape and move up in the menu
Summary of Contents for ZQ375 Checkweigher
Page 1: ...ZQ375 Checkweigher User Instructions AWT35 500812 Issue AC...
Page 93: ......
