Avery Weigh-Tronix ZQ375 Checkweigher, User Instructions

Page: 83 / 94

ZQ375 Checkweigher User Instructions 83
7.3 Supervisor menu for Adv375 application
25. Press PRINT or UNITS to toggle between the choices and when your choice is
displayed, press ZERO to accept …
digitS is displayed.
Graph
Check  Outputs  Out-gzb  USegDiv  OSegDiv  Prt tot  Tot Fmt
 Clr Tot  Digits  Graph
26. Press UNITS to go to the next menu item …
grAPh is displayed. Use this to turn the graph display oFF or on
(default) when in checkweighing mode. When set to oFF the weight
digits are the only part of the display that is on.
27. Press SELECT …
The current choice is displayed.
28. Press PRINT or UNITS to toggle between the choices and when your choice is
displayed, press ZERO to accept …
grAPh is displayed.
Stats
Check

Outputs

Out-gzb

USegDiv

OSegDiv

Prt tot

Tot Fmt

Clr Tot

Digits

Graph

Stats
29. Press UNITS to go to the next menu item …
StAtS is displayed. Use this to enable or disable the standard deviation
statistical program, the X-Bar/R program or to disable StAtS .
If you choose Std dEV , the standard deviation will be calculated after a
packrun is complete.
If you choose X bAr , the trend of the last eight weighments will be
reported in a printout. For more information see X-Bar/R Program on
page 42 .
If you choose diSAbLEd , no statistical information will be calculated.
This is the default choice.
30. Press SELECT …
The current choice is displayed.
31. Press PRINT or UNITS to toggle between the choices and when your choice is
displayed, press ZERO to accept …
StAtS is displayed.
The Reported Printout for the pack run can be customized to present statistical data
of your choosing. This information is found in the Service Manual.