Avery Weigh-Tronix ZQ375 Checkweigher, User Instructions

Page: 79 / 94

ZQ375 Checkweigher User Instructions 79
7.3 Supervisor menu for Adv375 application
Follow these steps to use the Supervisor menu:
Access the Supervisor menu (password 1793). See Accessing the menus on page 49 .
7.3.1 Setpoint
Super  Setpoint
The Setpoint menu is the same in all the applications. See Setpoint on page 65 .
7.3.2 Tare
Super  Setpoint  Tare
The Tare menu is the same in all the applications. See Tare on page 72 .
7.3.3 Check
Super  Setpoint  Tare  Check
1. From SEtPoint press UNITS …
chEcK is displayed. This is the checkweighing configuration item. Under
this you can:
l
Set the outputs to be latched or unlatched
l
Enable outputs on or off in gross zero band
l
Set the under and over segment division size
l
Enable/disable printing of the total in a packrun
l
Choose the total print format number
l
Enable/disable clearing the total after a packrun
l
Turn weight digits on or off during checkweighing
l
Turn checkweighing graph on or off during checkweighing
l
Enable/disable Standard Deviation calculation on a packrun
l
Choose the number of weighments in a packrun
l
Set the type of checkweighing: Limits or Sample
l
Enable/disable auto tare when target weight is reached
l
Reset all the checkweighing items to factory defaults.
Follow the steps below.
All numeric values require scroll entry. See Numeric entry procedure on page 19 .