Avery Weigh-Tronix ZQ375 Checkweigher, User Instructions

Page: 82 / 94

82 ZQ375 Checkweigher User Instructions
Supervisor menu
Total format
Check  Outputs  Out-gzb  USegDiv  OSegDiv  Prt tot  Tot Fmt
17. Press UNITS to go to the next menu item …
tot FMt is displayed. Use this to choose a print format for the Total report
of the packrun.
18. Press SELECT …
The current print format number is displayed.
19. Press ZERO to accept this or use the Numeric entry procedure on page 19 to
enter a new print format number and press ZERO to accept …
tot FMt is displayed.
Clear total
Check  Outputs  Out-gzb  USegDiv  OSegDiv  Prt tot  Tot Fmt
 Clr Tot
20. Press UNITS to go to the next menu item …
cLr tot is displayed. Use this to enable or disable the clearing of the total
packrun information. Choose on (default) to enable and oFF to disable
the clearing of the information.
21. Press SELECT …
The current choice is displayed.
22. Press PRINT or UNITS to toggle between the choices and when your choice is
displayed, press ZERO to accept …
cLr tot is displayed.
Digits
Check  Outputs  Out-gzb  USegDiv  OSegDiv  Prt tot  Tot Fmt
 Clr Tot  Digits
23. Press UNITS to go to the next menu item …
digitS is displayed. Use this to turn the weight display on (default) or
oFF when in checkweighing mode. When set to oFF the bargraph is the
only part of the display that is on.
24. Press SELECT …
The current choice is displayed.
The Total Report for the pack run can be customized to present statistical data of your
choosing. This information is found in the Service manual.